<nobr id="tfbff"><em id="tfbff"></em></nobr>
    <ins id="tfbff"><span id="tfbff"><menuitem id="tfbff"></menuitem></span></ins>
    <b id="tfbff"><strike id="tfbff"></strike></b>
    <ruby id="tfbff"><strike id="tfbff"><ins id="tfbff"></ins></strike></ruby>

      <ruby id="tfbff"><rp id="tfbff"><ins id="tfbff"></ins></rp></ruby>

      <var id="tfbff"></var>
      <ruby id="tfbff"></ruby>
      <strike id="tfbff"></strike>

          <ruby id="tfbff"><span id="tfbff"><mark id="tfbff"></mark></span></ruby>

            <i id="tfbff"></i>

              歡迎光臨 : 北京品立科技有限責任公司服務熱線 :+86-400-127-3302
              語言選擇: 中文版 ∷  英文版

              知識吧

              Install gpiod

              sudo apt update
              sudo apt install gpiod
              Six command-line tools are available:

              * gpiodetect - list all gpiochips present on the system, their names, labels
                             and number of GPIO lines
              
              * gpioinfo   - list all lines of specified gpiochips, their names, consumers,
                             direction, active state and additional flags
              
              * gpioget    - read values of specified GPIO lines
              
              * gpioset    - set values of specified GPIO lines, potentially keep the lines
                             exported and wait until timeout, user input or signal
              
              * gpiofind   - find the gpiochip name and line offset given the line name
              
              * gpiomon    - wait for events on GPIO lines, specify which events to watch,
                             how many events to process before exiting or if the events
                             should be reported to the console

              sudo apt-get update
              sudo apt-get install nvidia-jetpack

              CUDA:

              終端命令行執行:nvcc -V,

              如果提示:bash: nvcc: command not found

              則先導入環境變量:

              $  export  PATH=/usr/local/cuda-11/bin:$PATH

              $  export  LD_LIBRARY_PATH=/usr/local/cuda-11/lib64:$LD_LIBRARY_PATH

              再執行nvcc -V即可。


              cudnn:

              終端命令行執行:

              $  dpkg  --list  | grep  cudnn


              opencv:

              終端命令行執行:

              $  dpkg  --list  | grep  libopencv


              tensorRT:

              終端命令行執行:

              $  pip   list   |  grep  tensorrt



              $ sudo apt-get install netplan.io -y

              $ cd /etc/netplan

              $ sudo vim 01-network-manager-all.yaml

              添加以下內容,添加完成過后保存并退出:
              network:
                  version: 2
                  renderer: NetworkManager
                  ethernets:
                      eth0:  # 有線網卡的名字
                          mtu: 9000 #設置的mtu值,如果加上此項過后,需重啟系統才會生效。
                          addresses: [11.22.33.44/24]  # 填IP地址,后面有一個/24
                          dhcp4: no  # IPv4關閉自動獲取IP
                          dhcp6: no  # IPv6關閉自動獲取IP
                          gateway4: 11.22.33.2  # 設置網關,注意網關前3位跟IP地址前3位肯定是一致的。
                          nameservers:
                              addresses: [22.33.44.1,22.33.44.2] # 設置DNS解析主、備的服務器IP地址,如果有多個中間用逗號隔開,但不要有空格


              $ sudo  netplan apply或者直接重啟系統

              echo 255 > /sys/kernel/debug/tegra_fan/target_pwm  (L4T老版本

              或者

              echo 255 >/sys/devices/pwm-fan/target_pwm

              或者

              sudo  systemctl  stop  nvfancontrol.service 

              echo  255 > /sys/devices/platform/pwm-fan/hwmon/hwmon3/pwm1    (Jetpack5.*)

              運行如下命令:

              head -n1 /etc/nv_tegra_release

              在/etc/modprobe.d/bcmdhd.conf文件中加入配置內容后重啟系統生效:
              options bcmdhd op_mode=2

              聯系我們

              技術支持:陳工 +86-17607148846

              技術支持:耿工 +86-18515155467

              聯系電話:400-127-3302

              聯系郵箱:gcs@plink-ai.com

              聯系地址: 北京市海淀區上地三街金隅嘉華大廈C1108

              97视频热人人精品免费_久久综合狠狠综合久久_久久精品免费一区二区_日韩国产精品无码免费专区